dmesg - Hybrid Base gnupg 120223
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-16-generic (buildd@allspice) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #28-Ubuntu SMP Fri Jan 27 17:44:39 UTC 2012 (Ubuntu 3.0.0-16.28-generic 3.0.17)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.0.0-16-generic root=/dev/mapper/system-root ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfda0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfda0000 - 00000000cfdd1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfdd1000 - 00000000cfe00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfe00000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000042f000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-990FXA-UD3/GA-990FXA-UD3, BIOS F5 10/13/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x42f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000042f000000 aka 17136M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC
[ 0.000000] total RAM covered: 3326M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 4 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC
[ 0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfda0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f4b70] f4b70
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfda0000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfc00000 page 2M
[ 0.000000] 00cfc00000 - 00cfda0000 page 4k
[ 0.000000] kernel direct mapping tables up to cfda0000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000042f000000
[ 0.000000] 0100000000 - 0400000000 page 1G
[ 0.000000] 0400000000 - 042f000000 page 2M
[ 0.000000] kernel direct mapping tables up to 42f000000 @ cfd9e000-cfda0000
[ 0.000000] RAMDISK: 35968000 - 36cac000
[ 0.000000] ACPI: RSDP 00000000000f6a90 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfdd1000 0004C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cfdd1080 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cfdd1100 07997 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000cfda0000 00040
[ 0.000000] ACPI: MSDM 00000000cfdd8b80 00055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: HPET 00000000cfdd8c00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cfdd8c40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: MATS 00000000cfdd8cc0 00034 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG 00000000cfdd8d30 00202 (v01 GBT GBT B0 5455312E BG?? 53450101)
[ 0.000000] ACPI: APIC 00000000cfdd8ac0 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: MATS 00000000cfdd8f40 0648F (v01 MATS RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000cfddf440 01714 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: IVRS 00000000cfde0bd0 000F8 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000042f000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000042f000000
[ 0.000000] NODE_DATA [000000042effb000 - 000000042effffff]
[ 0.000000] [ffffea0000000000-ffffea000ebfffff] PMD -> [ffff88041e600000-ffff88042c7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0042f000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfda0
[ 0.000000] 0: 0x00100000 -> 0x0042f000
[ 0.000000] On node 0 totalpages: 4189487
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 832984 pages, LIFO batch:31
[ 0.000000] Normal zone: 45640 pages used for memmap
[ 0.000000] Normal zone: 3292600 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfda0000 - 00000000cfdd1000
[ 0.000000] PM: Registered nosave memory: 00000000cfdd1000 - 00000000cfe00000
[ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88042ec00000 s79616 r8192 d22784 u262144
[ 0.000000] pcpu-alloc: s79616 r8192 d22784 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4129506
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.0-16-generic root=/dev/mapper/system-root ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ c4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 16358720k/17547264k available (6138k kernel code, 789316k absent, 399228k reserved, 6896k data, 988k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 134217728 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3121.431 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6242.86 BogoMIPS (lpj=12485724)
[ 0.004006] pid_max: default: 32768 minimum: 301
[ 0.004027] Security Framework initialized
[ 0.004037] AppArmor: AppArmor initialized
[ 0.004039] Yama: becoming mindful.
[ 0.005614] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.010090] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.011758] Mount-cache hash table entries: 256
[ 0.011859] Initializing cgroup subsys cpuacct
[ 0.011863] Initializing cgroup subsys memory
[ 0.011870] Initializing cgroup subsys devices
[ 0.011871] Initializing cgroup subsys freezer
[ 0.011873] Initializing cgroup subsys net_cls
[ 0.011874] Initializing cgroup subsys blkio
[ 0.011879] Initializing cgroup subsys perf_event
[ 0.011900] tseg: 00cff00000
[ 0.011901] CPU: Physical Processor ID: 0
[ 0.011902] CPU: Processor Core ID: 0
[ 0.011904] mce: CPU supports 7 MCE banks
[ 0.013250] ACPI: Core revision 20110413
[ 0.016022] ftrace: allocating 25737 entries in 101 pages
[ 0.020344] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061485] CPU0: AMD FX(tm)-8120 Eight-Core Processor stepping 02
[ 0.064003] Performance Events: AMD Family 15h PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 48
[ 0.064003] ... generic registers: 6
[ 0.064003] ... value mask: 0000ffffffffffff
[ 0.064003] ... max period: 00007fffffffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 000000000000003f
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 9a000
[ 0.152091] #2
[ 0.152094] smpboot cpu 2: start_ip = 9a000
[ 0.244073] #3
[ 0.244074] smpboot cpu 3: start_ip = 9a000
[ 0.336073] #4
[ 0.336074] smpboot cpu 4: start_ip = 9a000
[ 0.428082] #5
[ 0.428083] smpboot cpu 5: start_ip = 9a000
[ 0.520091] #6
[ 0.520092] smpboot cpu 6: start_ip = 9a000
[ 0.612099] #7 Ok.
[ 0.612101] smpboot cpu 7: start_ip = 9a000
[ 0.704047] Brought up 8 CPUs
[ 0.704050] Total of 8 processors activated (49932.50 BogoMIPS).
[ 0.708195] devtmpfs: initialized
[ 0.712086] PM: Registering ACPI NVS region at cfda0000 (200704 bytes)
[ 0.713346] print_constraints: dummy:
[ 0.713364] Time: 0:14:39 Date: 02/23/12
[ 0.713395] NET: Registered protocol family 16
[ 0.713404] Trying to unpack rootfs image as initramfs...
[ 0.713516] Extended Config Space enabled on 1 nodes
[ 0.713566] ACPI: bus type pci registered
[ 0.713622] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.713625] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.748391] PCI: Using configuration type 1 for base access
[ 0.749290] bio: create slab at 0
[ 0.749373] ACPI: EC: Look up EC in DSDT
[ 0.760206] ACPI Warning: Incorrect checksum in table [TAMG] - 0x45, should be 0x44 (20110413/tbutils-314)
[ 0.760396] ACPI: Interpreter enabled
[ 0.760399] ACPI: (supports S0 S3 S4 S5)
[ 0.760421] ACPI: Using IOAPIC for interrupt routing
[ 0.955135] ACPI: No dock devices found.
[ 0.955138] HEST: Table not found.
[ 0.955142] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.955211] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.955353] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.955356] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.955359] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.955362] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.955365] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.955368] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
[ 0.955386] pci 0000:00:00.0: [1002:5a14] type 0 class 0x000600
[ 0.955403] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.955442] pci 0000:00:00.2: [1002:5a23] type 0 class 0x000806
[ 0.955494] pci 0000:00:02.0: [1002:5a16] type 1 class 0x000604
[ 0.955522] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.955526] pci 0000:00:02.0: PME# disabled
[ 0.955547] pci 0000:00:09.0: [1002:5a1c] type 1 class 0x000604
[ 0.955574] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.955577] pci 0000:00:09.0: PME# disabled
[ 0.955592] pci 0000:00:0a.0: [1002:5a1d] type 1 class 0x000604
[ 0.955621] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.955625] pci 0000:00:0a.0: PME# disabled
[ 0.955655] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[ 0.955671] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
[ 0.955679] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
[ 0.955688] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
[ 0.955696] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.955704] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.955713] pci 0000:00:11.0: reg 24: [mem 0xfdfff000-0xfdfff3ff]
[ 0.955729] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.955759] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.955770] pci 0000:00:12.0: reg 10: [mem 0xfdffe000-0xfdffefff]
[ 0.955833] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.955851] pci 0000:00:12.2: reg 10: [mem 0xfdffd000-0xfdffd0ff]
[ 0.955907] pci 0000:00:12.2: supports D1 D2
[ 0.955909] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.955913] pci 0000:00:12.2: PME# disabled
[ 0.955931] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.955943] pci 0000:00:13.0: reg 10: [mem 0xfdffc000-0xfdffcfff]
[ 0.956003] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.956022] pci 0000:00:13.2: reg 10: [mem 0xfdffb000-0xfdffb0ff]
[ 0.956084] pci 0000:00:13.2: supports D1 D2
[ 0.956086] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.956090] pci 0000:00:13.2: PME# disabled
[ 0.956113] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.956180] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.956192] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.956201] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.956209] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.956217] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.956226] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
[ 0.956255] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.956273] pci 0000:00:14.2: reg 10: [mem 0xfdff4000-0xfdff7fff 64bit]
[ 0.956319] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.956323] pci 0000:00:14.2: PME# disabled
[ 0.956338] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.956402] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.956436] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.956448] pci 0000:00:14.5: reg 10: [mem 0xfdffa000-0xfdffafff]
[ 0.956507] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[ 0.956555] pci 0000:00:15.0: supports D1 D2
[ 0.956575] pci 0000:00:15.1: [1002:43a1] type 1 class 0x000604
[ 0.956621] pci 0000:00:15.1: supports D1 D2
[ 0.956641] pci 0000:00:15.2: [1002:43a2] type 1 class 0x000604
[ 0.956693] pci 0000:00:15.2: supports D1 D2
[ 0.956713] pci 0000:00:15.3: [1002:43a3] type 1 class 0x000604
[ 0.956757] pci 0000:00:15.3: supports D1 D2
[ 0.956778] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 0.956790] pci 0000:00:16.0: reg 10: [mem 0xfdff9000-0xfdff9fff]
[ 0.956855] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 0.956871] pci 0000:00:16.2: reg 10: [mem 0xfdff8000-0xfdff80ff]
[ 0.956926] pci 0000:00:16.2: supports D1 D2
[ 0.956928] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.956932] pci 0000:00:16.2: PME# disabled
[ 0.956955] pci 0000:00:18.0: [1022:1600] type 0 class 0x000600
[ 0.956979] pci 0000:00:18.1: [1022:1601] type 0 class 0x000600
[ 0.956996] pci 0000:00:18.2: [1022:1602] type 0 class 0x000600
[ 0.957013] pci 0000:00:18.3: [1022:1603] type 0 class 0x000600
[ 0.957033] pci 0000:00:18.4: [1022:1604] type 0 class 0x000600
[ 0.957050] pci 0000:00:18.5: [1022:1605] type 0 class 0x000600
[ 0.957113] pci 0000:01:00.0: [1002:6739] type 0 class 0x000300
[ 0.957128] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.957140] pci 0000:01:00.0: reg 18: [mem 0xfddc0000-0xfdddffff 64bit]
[ 0.957149] pci 0000:01:00.0: reg 20: [io 0xee00-0xeeff]
[ 0.957163] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.957183] pci 0000:01:00.0: supports D1 D2
[ 0.957207] pci 0000:01:00.1: [1002:aa88] type 0 class 0x000403
[ 0.957222] pci 0000:01:00.1: reg 10: [mem 0xfddfc000-0xfddfffff 64bit]
[ 0.957275] pci 0000:01:00.1: supports D1 D2
[ 0.964074] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.964079] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.964082] pci 0000:00:02.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.964087] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.964124] pci 0000:02:00.0: [1b6f:7023] type 0 class 0x000c03
[ 0.964145] pci 0000:02:00.0: reg 10: [mem 0xfdaf8000-0xfdafffff 64bit]
[ 0.964211] pci 0000:02:00.0: supports D1 D2
[ 0.964213] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.964218] pci 0000:02:00.0: PME# disabled
[ 0.972073] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 0.972078] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.972081] pci 0000:00:09.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.972086] pci 0000:00:09.0: bridge window [mem 0xfd100000-0xfd1fffff 64bit pref]
[ 0.972135] pci 0000:03:00.0: [1b4b:917a] type 0 class 0x000101
[ 0.972149] pci 0000:03:00.0: reg 10: [io 0xcf00-0xcf07]
[ 0.972159] pci 0000:03:00.0: reg 14: [io 0xce00-0xce03]
[ 0.972166] pci 0000:03:00.0: reg 18: [io 0xcd00-0xcd07]
[ 0.972174] pci 0000:03:00.0: reg 1c: [io 0xcc00-0xcc03]
[ 0.972181] pci 0000:03:00.0: reg 20: [io 0xcb00-0xcb0f]
[ 0.972189] pci 0000:03:00.0: reg 24: [mem 0xfd0ff000-0xfd0ff1ff]
[ 0.972197] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.972218] pci 0000:03:00.0: PME# supported from D3hot
[ 0.972221] pci 0000:03:00.0: PME# disabled
[ 0.980072] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 0.980077] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 0.980081] pci 0000:00:0a.0: bridge window [mem 0xfd000000-0xfd0fffff]
[ 0.980085] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.980130] pci 0000:04:0e.0: [1106:3044] type 0 class 0x000c00
[ 0.980154] pci 0000:04:0e.0: reg 10: [mem 0xfdcff000-0xfdcff7ff]
[ 0.980166] pci 0000:04:0e.0: reg 14: [io 0xbf00-0xbf7f]
[ 0.980235] pci 0000:04:0e.0: supports D2
[ 0.980237] pci 0000:04:0e.0: PME# supported from D2 D3hot D3cold
[ 0.980243] pci 0000:04:0e.0: PME# disabled
[ 0.980273] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.980277] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.980283] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.980288] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref]
[ 0.980292] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.980295] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.980298] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.980301] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.980304] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.980307] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
[ 0.980362] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
[ 0.980378] pci 0000:05:00.0: reg 10: [io 0xae00-0xaeff]
[ 0.980405] pci 0000:05:00.0: reg 18: [mem 0xfd8ff000-0xfd8fffff 64bit pref]
[ 0.980422] pci 0000:05:00.0: reg 20: [mem 0xfd8f8000-0xfd8fbfff 64bit pref]
[ 0.980473] pci 0000:05:00.0: supports D1 D2
[ 0.980476] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.980481] pci 0000:05:00.0: PME# disabled
[ 0.988077] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 0.988083] pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
[ 0.988087] pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.988092] pci 0000:00:15.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.988150] pci 0000:06:00.0: [1b6f:7023] type 0 class 0x000c03
[ 0.988174] pci 0000:06:00.0: reg 10: [mem 0xfd7f8000-0xfd7fffff 64bit]
[ 0.988254] pci 0000:06:00.0: supports D1 D2
[ 0.988257] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.988262] pci 0000:06:00.0: PME# disabled
[ 0.996077] pci 0000:00:15.1: PCI bridge to [bus 06-06]
[ 0.996083] pci 0000:00:15.1: bridge window [io 0x9000-0x9fff]
[ 0.996087] pci 0000:00:15.1: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.996093] pci 0000:00:15.1: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
[ 0.996136] pci 0000:00:15.2: PCI bridge to [bus 07-07]
[ 0.996141] pci 0000:00:15.2: bridge window [io 0x8000-0x8fff]
[ 0.996146] pci 0000:00:15.2: bridge window [mem 0xfd500000-0xfd5fffff]
[ 0.996152] pci 0000:00:15.2: bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
[ 0.996199] pci 0000:00:15.3: PCI bridge to [bus 08-08]
[ 0.996204] pci 0000:00:15.3: bridge window [io 0x7000-0x7fff]
[ 0.996209] pci 0000:00:15.3: bridge window [mem 0xfd300000-0xfd3fffff]
[ 0.996214] pci 0000:00:15.3: bridge window [mem 0xfd200000-0xfd2fffff 64bit pref]
[ 0.996241] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.996640] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.996691] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.996731] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.996770] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.996817] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.996884] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.996938] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.996977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.997023] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.997028] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.997030] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.016706] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
[ 1.016762] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
[ 1.016815] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
[ 1.016871] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
[ 1.016927] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
[ 1.016977] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
[ 1.017028] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
[ 1.017082] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
[ 1.017203] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.017209] vgaarb: loaded
[ 1.017210] vgaarb: bridge control possible 0000:01:00.0
[ 1.017418] SCSI subsystem initialized
[ 1.017458] libata version 3.00 loaded.
[ 1.017458] usbcore: registered new interface driver usbfs
[ 1.017458] usbcore: registered new interface driver hub
[ 1.017458] usbcore: registered new device driver usb
[ 1.017458] PCI: Using ACPI for IRQ routing
[ 1.024423] PCI: pci_cache_line_size set to 64 bytes
[ 1.024435] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 1.024538] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 1.024541] reserve RAM buffer: 00000000cfda0000 - 00000000cfffffff
[ 1.024545] reserve RAM buffer: 000000042f000000 - 000000042fffffff
[ 1.024637] NetLabel: Initializing
[ 1.024639] NetLabel: domain hash size = 128
[ 1.024640] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.024651] NetLabel: unlabeled traffic allowed by default
[ 1.024690] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.024695] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 1.026752] Switching to clocksource hpet
[ 1.026945] Freeing initrd memory: 19728k freed
[ 1.026868] Switched to NOHz mode on CPU #0
[ 1.026759] Switched to NOHz mode on CPU #5
[ 1.026758] Switched to NOHz mode on CPU #3
[ 1.026757] Switched to NOHz mode on CPU #2
[ 1.026759] Switched to NOHz mode on CPU #6
[ 1.026758] Switched to NOHz mode on CPU #4
[ 1.026945] Switched to NOHz mode on CPU #1
[ 1.026760] Switched to NOHz mode on CPU #7
[ 1.032580] AppArmor: AppArmor Filesystem Enabled
[ 1.032603] pnp: PnP ACPI init
[ 1.032618] ACPI: bus type pnp registered
[ 1.032709] pnp 00:00: [bus 00-ff]
[ 1.032712] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.032714] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.032716] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.032718] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.032720] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 1.032722] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 1.032724] pnp 00:00: [mem 0xd0000000-0xfebfffff window]
[ 1.032766] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 1.032777] pnp 00:01: [io 0x0010-0x001f]
[ 1.032779] pnp 00:01: [io 0x0022-0x003f]
[ 1.032780] pnp 00:01: [io 0x0044-0x004d]
[ 1.032782] pnp 00:01: [io 0x0050-0x005f]
[ 1.032784] pnp 00:01: [io 0x0062-0x0063]
[ 1.032785] pnp 00:01: [io 0x0065-0x006f]
[ 1.032787] pnp 00:01: [io 0x0074-0x007f]
[ 1.032789] pnp 00:01: [io 0x0091-0x0093]
[ 1.032790] pnp 00:01: [io 0x00a2-0x00bf]
[ 1.032792] pnp 00:01: [io 0x00e0-0x00ef]
[ 1.032793] pnp 00:01: [io 0x04d0-0x04d1]
[ 1.032795] pnp 00:01: [io 0x0220-0x0225]
[ 1.032797] pnp 00:01: [io 0x0290-0x0294]
[ 1.032854] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 1.032857] system 00:01: [io 0x0220-0x0225] has been reserved
[ 1.032859] system 00:01: [io 0x0290-0x0294] has been reserved
[ 1.032862] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.064432] pnp 00:02: [io 0x0900-0x091f]
[ 1.064435] pnp 00:02: [io 0x0228-0x022f]
[ 1.064437] pnp 00:02: [io 0x040b]
[ 1.064438] pnp 00:02: [io 0x04d6]
[ 1.064440] pnp 00:02: [io 0x0c00-0x0c01]
[ 1.064441] pnp 00:02: [io 0x0c14]
[ 1.064443] pnp 00:02: [io 0x0c50-0x0c52]
[ 1.064444] pnp 00:02: [io 0x0c6c-0x0c6d]
[ 1.064446] pnp 00:02: [io 0x0c6f]
[ 1.064448] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 1.064449] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 1.064451] pnp 00:02: [io 0x0cd4-0x0cdf]
[ 1.064452] pnp 00:02: [io 0x0800-0x08fe]
[ 1.064454] pnp 00:02: [io 0x0a10-0x0a17]
[ 1.064456] pnp 00:02: [io 0x0b00-0x0b0f]
[ 1.064457] pnp 00:02: [io 0x0b10-0x0b1f]
[ 1.064459] pnp 00:02: [io 0x0b20-0x0b3f]
[ 1.064461] pnp 00:02: [mem 0x00000000-0x00000fff window]
[ 1.064465] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
[ 1.064470] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.064504] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 1.064512] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[ 1.064549] system 00:02: [io 0x0900-0x091f] has been reserved
[ 1.064552] system 00:02: [io 0x0228-0x022f] has been reserved
[ 1.064554] system 00:02: [io 0x040b] has been reserved
[ 1.064556] system 00:02: [io 0x04d6] has been reserved
[ 1.064559] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 1.064561] system 00:02: [io 0x0c14] has been reserved
[ 1.064563] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 1.064565] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
[ 1.064567] system 00:02: [io 0x0c6f] has been reserved
[ 1.064570] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 1.064572] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 1.064574] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
[ 1.064578] system 00:02: [io 0x0800-0x08fe] has been reserved
[ 1.064580] system 00:02: [io 0x0a10-0x0a17] has been reserved
[ 1.064583] system 00:02: [io 0x0b00-0x0b0f] has been reserved
[ 1.064585] system 00:02: [io 0x0b10-0x0b1f] has been reserved
[ 1.064587] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 1.064590] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 1.064593] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.064689] pnp 00:03: [dma 4]
[ 1.064691] pnp 00:03: [io 0x0000-0x000f]
[ 1.064692] pnp 00:03: [io 0x0080-0x0090]
[ 1.064694] pnp 00:03: [io 0x0094-0x009f]
[ 1.064696] pnp 00:03: [io 0x00c0-0x00df]
[ 1.064721] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.064774] pnp 00:04: [irq 0 disabled]
[ 1.064781] pnp 00:04: [irq 8]
[ 1.064783] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 1.064809] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.064840] pnp 00:05: [io 0x0070-0x0073]
[ 1.064867] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.064874] pnp 00:06: [io 0x0061]
[ 1.064899] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 1.064907] pnp 00:07: [io 0x00f0-0x00ff]
[ 1.064911] pnp 00:07: [irq 13]
[ 1.064939] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.065227] pnp 00:08: [io 0x03f8-0x03ff]
[ 1.065231] pnp 00:08: [irq 4]
[ 1.065284] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.065318] pnp 00:09: [io 0x0060]
[ 1.065320] pnp 00:09: [io 0x0064]
[ 1.065323] pnp 00:09: [irq 1]
[ 1.065358] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.065389] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 1.065441] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.065444] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.065579] pnp 00:0b: [mem 0x000f0000-0x000f3fff]
[ 1.065581] pnp 00:0b: [mem 0x000f4000-0x000f7fff]
[ 1.065583] pnp 00:0b: [mem 0x000f8000-0x000fbfff]
[ 1.065585] pnp 00:0b: [mem 0x000fc000-0x000fffff]
[ 1.065586] pnp 00:0b: [mem 0xcfda0000-0xcfdfffff]
[ 1.065588] pnp 00:0b: [mem 0xffff0000-0xffffffff]
[ 1.065590] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 1.065592] pnp 00:0b: [mem 0x00100000-0xcfd9ffff]
[ 1.065593] pnp 00:0b: [mem 0xcfe00000-0xcfefffff]
[ 1.065595] pnp 00:0b: [mem 0xcff00000-0xcfffffff]
[ 1.065597] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 1.065599] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 1.065600] pnp 00:0b: [mem 0xfff80000-0xfffeffff]
[ 1.065604] pnp 00:0b: disabling [mem 0x000f0000-0x000f3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.065607] pnp 00:0b: disabling [mem 0x000f4000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.065611] pnp 00:0b: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.065614] pnp 00:0b: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.065617] pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.065621] pnp 00:0b: disabling [mem 0x00100000-0xcfd9ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.065687] system 00:0b: [mem 0xcfda0000-0xcfdfffff] could not be reserved
[ 1.065689] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
[ 1.065692] system 00:0b: [mem 0xcfe00000-0xcfefffff] has been reserved
[ 1.065694] system 00:0b: [mem 0xcff00000-0xcfffffff] could not be reserved
[ 1.065697] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.065699] system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 1.065702] system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved
[ 1.065704] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.065723] pnp: PnP ACPI: found 12 devices
[ 1.065725] ACPI: ACPI bus type pnp unregistered
[ 1.071443] PCI: max bus depth: 1 pci_try_num: 2
[ 1.071479] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
[ 1.071482] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 1.071484] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 1.071487] pci 0000:00:02.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 1.071490] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.071494] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 1.071496] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 1.071499] pci 0000:00:09.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 1.071502] pci 0000:00:09.0: bridge window [mem 0xfd100000-0xfd1fffff 64bit pref]
[ 1.071506] pci 0000:03:00.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref]
[ 1.071508] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 1.071510] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 1.071513] pci 0000:00:0a.0: bridge window [mem 0xfd000000-0xfd0fffff]
[ 1.071516] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 1.071520] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 1.071522] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 1.071527] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 1.071530] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref]
[ 1.071536] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 1.071538] pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
[ 1.071542] pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 1.071545] pci 0000:00:15.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 1.071550] pci 0000:00:15.1: PCI bridge to [bus 06-06]
[ 1.071552] pci 0000:00:15.1: bridge window [io 0x9000-0x9fff]
[ 1.071556] pci 0000:00:15.1: bridge window [mem 0xfd700000-0xfd7fffff]
[ 1.071559] pci 0000:00:15.1: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
[ 1.071564] pci 0000:00:15.2: PCI bridge to [bus 07-07]
[ 1.071566] pci 0000:00:15.2: bridge window [io 0x8000-0x8fff]
[ 1.071570] pci 0000:00:15.2: bridge window [mem 0xfd500000-0xfd5fffff]
[ 1.071574] pci 0000:00:15.2: bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
[ 1.071578] pci 0000:00:15.3: PCI bridge to [bus 08-08]
[ 1.071581] pci 0000:00:15.3: bridge window [io 0x7000-0x7fff]
[ 1.071584] pci 0000:00:15.3: bridge window [mem 0xfd300000-0xfd3fffff]
[ 1.071588] pci 0000:00:15.3: bridge window [mem 0xfd200000-0xfd2fffff 64bit pref]
[ 1.071600] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.071604] pci 0000:00:02.0: setting latency timer to 64
[ 1.071612] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.071615] pci 0000:00:09.0: setting latency timer to 64
[ 1.071619] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.071622] pci 0000:00:0a.0: setting latency timer to 64
[ 1.071630] pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.071633] pci 0000:00:15.0: setting latency timer to 64
[ 1.071638] pci 0000:00:15.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.071641] pci 0000:00:15.1: setting latency timer to 64
[ 1.071646] pci 0000:00:15.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.071649] pci 0000:00:15.2: setting latency timer to 64
[ 1.071654] pci 0000:00:15.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.071657] pci 0000:00:15.3: setting latency timer to 64
[ 1.071661] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.071663] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.071665] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.071667] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 1.071669] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 1.071671] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfebfffff]
[ 1.071673] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 1.071675] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 1.071677] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.071679] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 1.071681] pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff]
[ 1.071683] pci_bus 0000:02: resource 2 [mem 0xfd100000-0xfd1fffff 64bit pref]
[ 1.071686] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 1.071688] pci_bus 0000:03: resource 1 [mem 0xfd000000-0xfd0fffff]
[ 1.071690] pci_bus 0000:03: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 1.071692] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 1.071694] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 1.071696] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff pref]
[ 1.071698] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 1.071700] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 1.071702] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.071704] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[ 1.071706] pci_bus 0000:04: resource 8 [mem 0xfed40000-0xfed44fff]
[ 1.071708] pci_bus 0000:04: resource 9 [mem 0xd0000000-0xfebfffff]
[ 1.071710] pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
[ 1.071712] pci_bus 0000:05: resource 1 [mem 0xfd900000-0xfd9fffff]
[ 1.071714] pci_bus 0000:05: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 1.071716] pci_bus 0000:06: resource 0 [io 0x9000-0x9fff]
[ 1.071718] pci_bus 0000:06: resource 1 [mem 0xfd700000-0xfd7fffff]
[ 1.071720] pci_bus 0000:06: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref]
[ 1.071722] pci_bus 0000:07: resource 0 [io 0x8000-0x8fff]
[ 1.071724] pci_bus 0000:07: resource 1 [mem 0xfd500000-0xfd5fffff]
[ 1.071726] pci_bus 0000:07: resource 2 [mem 0xfd400000-0xfd4fffff 64bit pref]
[ 1.071729] pci_bus 0000:08: resource 0 [io 0x7000-0x7fff]
[ 1.071731] pci_bus 0000:08: resource 1 [mem 0xfd300000-0xfd3fffff]
[ 1.071733] pci_bus 0000:08: resource 2 [mem 0xfd200000-0xfd2fffff 64bit pref]
[ 1.071761] NET: Registered protocol family 2
[ 1.072236] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.073873] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.075592] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.075782] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.075784] TCP reno registered
[ 1.075813] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.075892] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.076038] NET: Registered protocol family 1
[ 1.364100] pci 0000:01:00.0: Boot video device
[ 1.364177] PCI: CLS 64 bytes, default 64
[ 1.364446] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 1.364448] pci 0000:00:00.2: PCI INT A: no GSI
[ 1.364672] pci 0000:00:00.2: irq 40 for MSI/MSI-X
[ 1.364740] AMD-Vi: Enabling IOMMU at 0000:00:00.2 cap 0x40
[ 1.429803] AMD-Vi: Lazy IO/TLB flushing enabled
[ 1.429805] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.429808] Placing 64MB software IO TLB between ffff8800cbd9e000 - ffff8800cfd9e000
[ 1.429810] software IO TLB at phys 0xcbd9e000 - 0xcfd9e000
[ 1.430432] audit: initializing netlink socket (disabled)
[ 1.430440] type=2000 audit(1329956079.424:1): initialized
[ 1.468657] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.512841] VFS: Disk quotas dquot_6.5.2
[ 1.512891] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.513448] fuse init (API version 7.16)
[ 1.513522] msgmni has been set to 31989
[ 1.513923] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.513955] io scheduler noop registered
[ 1.513957] io scheduler deadline registered
[ 1.513990] io scheduler cfq registered (default)
[ 1.514284] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.514303] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.514392] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.514397] ACPI: Power Button [PWRB]
[ 1.514435] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.514438] ACPI: Power Button [PWRF]
[ 1.514459] ACPI: acpi_idle registered with cpuidle
[ 1.708908] ERST: Table is not found!
[ 1.729305] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.751144] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.751373] Linux agpgart interface v0.103
[ 1.752255] brd: module loaded
[ 1.752653] loop: module loaded
[ 1.752772] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.752806] pata_acpi 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.752819] pata_acpi 0000:03:00.0: setting latency timer to 64
[ 1.752827] pata_acpi 0000:03:00.0: PCI INT A disabled
[ 1.753074] Fixed MDIO Bus: probed
[ 1.753093] PPP generic driver version 2.4.2
[ 1.753120] tun: Universal TUN/TAP device driver, 1.6
[ 1.753121] tun: (C) 1999-2004 Max Krasnyansky
[ 1.753181] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.753191] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.753226] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.753253] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.753260] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.753284] QUIRK: Enable AMD PLL fix
[ 1.753293] ehci_hcd 0000:00:12.2: debug port 1
[ 1.753312] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfdffd000
[ 1.764046] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.764143] hub 1-0:1.0: USB hub found
[ 1.764147] hub 1-0:1.0: 5 ports detected
[ 1.764209] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.764221] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.764246] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.764252] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.764270] ehci_hcd 0000:00:13.2: debug port 1
[ 1.764279] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfdffb000
[ 1.776042] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.776131] hub 2-0:1.0: USB hub found
[ 1.776134] hub 2-0:1.0: 5 ports detected
[ 1.776194] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.776205] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.776231] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.776237] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.776255] ehci_hcd 0000:00:16.2: debug port 1
[ 1.776264] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfdff8000
[ 1.788036] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.788124] hub 3-0:1.0: USB hub found
[ 1.788127] hub 3-0:1.0: 4 ports detected
[ 1.788187] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.788198] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.788209] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.788237] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.788257] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfdffe000
[ 1.848105] hub 4-0:1.0: USB hub found
[ 1.848111] hub 4-0:1.0: 5 ports detected
[ 1.848169] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.848182] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.848213] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.848227] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfdffc000
[ 1.908107] hub 5-0:1.0: USB hub found
[ 1.908113] hub 5-0:1.0: 5 ports detected
[ 1.908175] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.908187] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.908215] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.908229] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfdffa000
[ 1.968109] hub 6-0:1.0: USB hub found
[ 1.968114] hub 6-0:1.0: 2 ports detected
[ 1.968170] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.968182] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.968207] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 1.968221] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfdff9000
[ 2.028101] hub 7-0:1.0: USB hub found
[ 2.028107] hub 7-0:1.0: 4 ports detected
[ 2.028166] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.028214] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.028216] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.028325] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.028398] mousedev: PS/2 mouse device common for all mice
[ 2.028480] rtc_cmos 00:05: RTC can wake from S4
[ 2.028549] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.028568] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.028646] device-mapper: uevent: version 1.0.3
[ 2.028705] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
[ 2.028828] cpuidle: using governor ladder
[ 2.029054] cpuidle: using governor menu
[ 2.029055] EFI Variables Facility v0.08 2004-May-17
[ 2.029253] TCP cubic registered
[ 2.029352] NET: Registered protocol family 10
[ 2.029784] NET: Registered protocol family 17
[ 2.029796] Registering the dns_resolver key type
[ 2.029865] PM: Hibernation image not present or could not be loaded.
[ 2.029872] registered taskstats version 1
[ 2.057402] Magic number: 0:866:203
[ 2.057493] rtc_cmos 00:05: setting system clock to 2012-02-23 00:14:41 UTC (1329956081)
[ 2.057545] powernow-k8: Found 1 AMD FX(tm)-8120 Eight-Core Processor (8 cpu cores) (version 2.20.00)
[ 2.057579] powernow-k8: Core Performance Boosting: on.
[ 2.057630] powernow-k8: 0 : pstate 0 (3100 MHz)
[ 2.057632] powernow-k8: 1 : pstate 1 (2800 MHz)
[ 2.057633] powernow-k8: 2 : pstate 2 (2300 MHz)
[ 2.057635] powernow-k8: 3 : pstate 3 (1900 MHz)
[ 2.057636] powernow-k8: 4 : pstate 4 (1400 MHz)
[ 2.058438] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.058441] EDD information not available.
[ 2.060924] Freeing unused kernel memory: 988k freed
[ 2.061109] Write protecting the kernel read-only data: 12288k
[ 2.066939] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 2.069218] Freeing unused kernel memory: 2036k freed
[ 2.074924] Freeing unused kernel memory: 1388k freed
[ 2.076043] usb 1-3: new high speed USB device number 2 using ehci_hcd
[ 2.093156] udevd[102]: starting version 173
[ 2.109660] wmi: Mapper loaded
[ 2.119665] ahci 0000:00:11.0: version 3.0
[ 2.119688] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.119784] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 2.119788] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.121681] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.121706] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 2.121711] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.121958] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[ 2.122045] xhci_hcd 0000:02:00.0: irq 17, io mem 0xfdaf8000
[ 2.122058] xhci_hcd 0000:02:00.0: Failed to enable MSI-X
[ 2.122095] xhci_hcd 0000:02:00.0: irq 41 for MSI/MSI-X
[ 2.122488] xHCI xhci_add_endpoint called for root hub
[ 2.122491] xHCI xhci_check_bandwidth called for root hub
[ 2.122537] hub 8-0:1.0: USB hub found
[ 2.122546] hub 8-0:1.0: 2 ports detected
[ 2.122679] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.122748] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[ 2.123311] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.123327] r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.123365] r8169 0000:05:00.0: setting latency timer to 64
[ 2.123372] r8169 0000:05:00.0: (unregistered net_device): unknown MAC, using family default
[ 2.123448] r8169 0000:05:00.0: irq 42 for MSI/MSI-X
[ 2.123686] scsi0 : ahci
[ 2.123808] scsi1 : ahci
[ 2.123919] scsi2 : ahci
[ 2.124139] r8169 0000:05:00.0: eth0: RTL8168b/8111b at 0xffffc900125d2000, 50:e5:49:c4:61:b7, XID 0c900800 IRQ 42
[ 2.124222] scsi3 : ahci
[ 2.124477] ata1: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 19
[ 2.124481] ata2: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 19
[ 2.124484] ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19
[ 2.124488] ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19
[ 2.124537] xHCI xhci_add_endpoint called for root hub
[ 2.124539] xHCI xhci_check_bandwidth called for root hub
[ 2.124571] hub 9-0:1.0: USB hub found
[ 2.124578] hub 9-0:1.0: 2 ports detected
[ 2.124631] xhci_hcd 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.124657] xhci_hcd 0000:06:00.0: setting latency timer to 64
[ 2.124661] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 2.124714] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 10
[ 2.124821] xhci_hcd 0000:06:00.0: irq 17, io mem 0xfd7f8000
[ 2.124837] xhci_hcd 0000:06:00.0: Failed to enable MSI-X
[ 2.124882] xhci_hcd 0000:06:00.0: irq 43 for MSI/MSI-X
[ 2.125040] xHCI xhci_add_endpoint called for root hub
[ 2.125042] xHCI xhci_check_bandwidth called for root hub
[ 2.125078] hub 10-0:1.0: USB hub found
[ 2.125085] hub 10-0:1.0: 2 ports detected
[ 2.125122] scsi4 : pata_atiixp
[ 2.125156] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 2.125191] scsi5 : pata_atiixp
[ 2.125195] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 11
[ 2.125286] xHCI xhci_add_endpoint called for root hub
[ 2.125288] xHCI xhci_check_bandwidth called for root hub
[ 2.125314] hub 11-0:1.0: USB hub found
[ 2.125321] hub 11-0:1.0: 2 ports detected
[ 2.126084] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 2.126087] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 2.291664] ata5.00: ATA-8: ST1500DL003-9VT16L, CC3C, max UDMA/133
[ 2.291667] ata5.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.291673] ata5.00: limited to UDMA/33 due to 40-wire cable
[ 2.300625] ata5.00: configured for UDMA/33
[ 2.428120] Refined TSC clocksource calibration: 3120.778 MHz.
[ 2.428129] Switching to clocksource tsc
[ 2.556113] usb 7-1: new low speed USB device number 2 using ohci_hcd
[ 2.616120] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.616151] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.616174] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.616195] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.662245] ata4.00: ATA-7: ST3400620NS, 3.CNK, max UDMA/133
[ 2.662252] ata4.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.662886] ata1.00: ATA-7: ST3400620NS, 3.CNK, max UDMA/133
[ 2.662888] ata1.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.665453] ata3.00: ATA-7: ST3400620NS, 3.AEE, max UDMA/133
[ 2.665461] ata3.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.666382] ata2.00: ATA-7: ST3400620NS, 3.AEE, max UDMA/133
[ 2.666389] ata2.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.720450] ata4.00: configured for UDMA/133
[ 2.721217] ata1.00: configured for UDMA/133
[ 2.721423] scsi 0:0:0:0: Direct-Access ATA ST3400620NS 3.CN PQ: 0 ANSI: 5
[ 2.721560] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.721658] sd 0:0:0:0: [sda] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[ 2.721734] sd 0:0:0:0: [sda] Write Protect is off
[ 2.721737] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.721769] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.732107] ata3.00: configured for UDMA/133
[ 2.733015] ata2.00: configured for UDMA/133
[ 2.733276] scsi 1:0:0:0: Direct-Access ATA ST3400620NS 3.AE PQ: 0 ANSI: 5
[ 2.733450] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.733556] sd 1:0:0:0: [sdb] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[ 2.733580] scsi 2:0:0:0: Direct-Access ATA ST3400620NS 3.AE PQ: 0 ANSI: 5
[ 2.733597] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.733599] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.733614] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.733685] sd 2:0:0:0: [sdc] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[ 2.733731] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.733736] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.733739] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.733761] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.733836] scsi 3:0:0:0: Direct-Access ATA ST3400620NS 3.CN PQ: 0 ANSI: 5
[ 2.733993] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 2.734062] sd 3:0:0:0: [sdd] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[ 2.734117] scsi 4:0:0:0: Direct-Access ATA ST1500DL003-9VT1 CC3C PQ: 0 ANSI: 5
[ 2.734130] sd 3:0:0:0: [sdd] Write Protect is off
[ 2.734133] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.734159] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.734238] sd 4:0:0:0: [sde] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 2.734241] sd 4:0:0:0: [sde] 4096-byte physical blocks
[ 2.734286] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 2.734292] sd 4:0:0:0: [sde] Write Protect is off
[ 2.734295] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 2.734317] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.744513] sde: sde1
[ 2.744734] sd 4:0:0:0: [sde] Attached SCSI disk
[ 2.760174] sdd: sdd1
[ 2.760500] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 2.760853] sda: sda1
[ 2.761109] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.771759] sdc: sdc1
[ 2.772162] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 2.772658] sdb: sdb1
[ 2.772951] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.774936] firewire_ohci 0000:04:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.778263] input: SIGMACH1P U+P Mouse as /devices/pci0000:00/0000:00:16.0/usb7/7-1/7-1:1.0/input/input3
[ 2.778545] generic-usb 0003:1C4F:0003.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACH1P U+P Mouse] on usb-0000:00:16.0-1/input0
[ 2.778628] usbcore: registered new interface driver usbhid
[ 2.778630] usbhid: USB HID core driver
[ 2.836181] firewire_ohci: Added fw-ohci device 0000:04:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[ 2.886630] md: bind
[ 2.897059] md: bind
[ 2.943634] md: bind
[ 2.994354] md: bind
[ 3.008244] async_tx: api initialized (async)
[ 3.076043] raid6: int64x1 1545 MB/s
[ 3.144036] raid6: int64x2 2526 MB/s
[ 3.182517] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[ 3.182519] vesafb: scrolling: redraw
[ 3.182522] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 3.212005] raid6: int64x4 2257 MB/s
[ 3.280016] raid6: int64x8 1779 MB/s
[ 3.348020] raid6: sse2x1 3184 MB/s
[ 3.416014] raid6: sse2x2 5666 MB/s
[ 3.484010] raid6: sse2x4 6887 MB/s
[ 3.484012] raid6: using algorithm sse2x4 (6887 MB/s)
[ 3.491363] firewire_core: created device fw0: GUID 0049e550963e0600, S400
[ 3.491798] xor: automatically using best checksumming function: generic_sse
[ 3.492079] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90012c00000, using 5824k, total 5824k
[ 3.492194] Console: switching to colour frame buffer device 175x65
[ 3.492217] fb0: VESA VGA frame buffer device
[ 3.508079] generic_sse: 10478.000 MB/sec
[ 3.508081] xor: using function: generic_sse (10478.000 MB/sec)
[ 3.508870] md: raid6 personality registered for level 6
[ 3.508873] md: raid5 personality registered for level 5
[ 3.508874] md: raid4 personality registered for level 4
[ 3.509016] bio: create slab at 1
[ 3.509030] md/raid:md0: device sdb1 operational as raid disk 1
[ 3.509032] md/raid:md0: device sda1 operational as raid disk 0
[ 3.509035] md/raid:md0: device sdc1 operational as raid disk 2
[ 3.509036] md/raid:md0: device sdd1 operational as raid disk 3
[ 3.509483] md/raid:md0: allocated 4282kB
[ 3.509525] md/raid:md0: raid level 5 active with 4 out of 4 devices, algorithm 2
[ 3.509527] RAID conf printout:
[ 3.509528] --- level:5 rd:4 wd:4
[ 3.509530] disk 0, o:1, dev:sda1
[ 3.509531] disk 1, o:1, dev:sdb1
[ 3.509533] disk 2, o:1, dev:sdc1
[ 3.509534] disk 3, o:1, dev:sdd1
[ 3.509555] md0: detected capacity change from 0 to 1200257236992
[ 3.511429] md0: unknown partition table
[ 4.270349] md: linear personality registered for level -1
[ 4.271840] md: multipath personality registered for level -4
[ 4.273287] md: raid0 personality registered for level 0
[ 4.274853] md: raid1 personality registered for level 1
[ 4.280742] md: raid10 personality registered for level 10
[ 4.380199] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 10.464626] udevd[456]: starting version 173
[ 10.490441] lp: driver loaded but no devices found
[ 10.500293] it87: Found IT8720F chip at 0x228, revision 8
[ 10.500311] it87: Routing internal VCCH to in7
[ 10.500316] it87: Beeping is supported
[ 10.500517] hwmon_vid: Unknown VRM version of your x86 CPU
[ 10.509964] Adding 39059452k swap on /dev/mapper/system-swap. Priority:-1 extents:1 across:39059452k
[ 10.586291] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 10.586295] Disabling lock debugging due to kernel taint
[ 10.624795] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 10.625271] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 10.626140] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro
[ 10.629465] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[ 10.646039] [fglrx] Maximum main memory to use for locked dma buffers: 15624 MBytes.
[ 10.646344] [fglrx] vendor: 1002 device: 6739 count: 1
[ 10.647773] [fglrx] ioport: bar 4, base 0xee00, size: 0x100
[ 10.647785] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.647790] pci 0000:01:00.0: setting latency timer to 64
[ 10.648375] [fglrx] Kernel PAT support is enabled
[ 10.648390] [fglrx] module loaded - fglrx 8.88.7 [Jul 28 2011] with 1 minors
[ 10.649400] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.663065] MCE: In-kernel MCE decoding enabled.
[ 10.668184] EDAC MC: Ver: 2.1.0
[ 10.668714] AMD64 EDAC driver v3.4.0
[ 10.701038] hda_codec: ALC889: BIOS auto-probing.
[ 10.713106] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 10.713268] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 10.713337] HDA Intel 0000:01:00.1: irq 44 for MSI/MSI-X
[ 10.713364] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 10.713482] EDAC amd64: DRAM ECC disabled.
[ 10.713494] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 10.713496] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 10.713498] (Note that use of the override may cause unknown side effects.)
[ 10.730685] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 10.730788] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input5
[ 10.766317] type=1400 audit(1329956090.204:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=721 comm="apparmor_parser"
[ 10.766328] type=1400 audit(1329956090.204:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=816 comm="apparmor_parser"
[ 10.766685] type=1400 audit(1329956090.204:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=721 comm="apparmor_parser"
[ 10.766697] type=1400 audit(1329956090.204:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=816 comm="apparmor_parser"
[ 10.766916] type=1400 audit(1329956090.204:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=721 comm="apparmor_parser"
[ 10.766932] type=1400 audit(1329956090.204:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=816 comm="apparmor_parser"
[ 11.028023] cfg80211: Calling CRDA to update world regulatory domain
[ 11.039258] cfg80211: World regulatory domain updated:
[ 11.039261] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.039265] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.039268] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.039271] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.039273] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.039276] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.064510] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 11.064513] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.064516] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 11.064518] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.064520] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 11.064522] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.064524] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 11.064527] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.064528] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 11.064531] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.064533] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 11.064535] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.064537] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 11.064539] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.064541] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 11.064543] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.064545] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 11.064548] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.064549] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 11.064552] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.064554] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 11.064556] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.064558] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 11.064560] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.064562] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 11.064565] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.064567] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 11.064569] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.066837] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.067367] Registered led device: rt2800usb-phy0::radio
[ 11.067385] Registered led device: rt2800usb-phy0::assoc
[ 11.067404] Registered led device: rt2800usb-phy0::quality
[ 11.068123] usbcore: registered new interface driver rt2800usb
[ 11.442336] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
[ 11.482802] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 11.506369] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 11.681931] ppdev: user-space parallel port driver
[ 11.741238] type=1400 audit(1329956091.180:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1080 comm="apparmor_parser"
[ 11.741693] type=1400 audit(1329956091.180:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1080 comm="apparmor_parser"
[ 13.855053] wlan0: authenticate with c0:c1:c0:0c:9f:1d (try 1)
[ 13.857334] wlan0: authenticated
[ 13.926818] wlan0: associate with c0:c1:c0:0c:9f:1d (try 1)
[ 13.929831] wlan0: RX AssocResp from c0:c1:c0:0c:9f:1d (capab=0x411 status=0 aid=6)
[ 13.929839] wlan0: associated
[ 13.964661] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 16.755189] init: failsafe main process (1044) killed by TERM signal
[ 16.793172] type=1400 audit(1329956096.232:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1226 comm="apparmor_parser"
[ 16.793365] type=1400 audit(1329956096.232:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1229 comm="apparmor_parser"
[ 16.793617] type=1400 audit(1329956096.232:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1226 comm="apparmor_parser"
[ 16.793646] type=1400 audit(1329956096.232:13): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=1229 comm="apparmor_parser"
[ 16.793707] type=1400 audit(1329956096.232:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1228 comm="apparmor_parser"
[ 16.793893] type=1400 audit(1329956096.232:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1226 comm="apparmor_parser"
[ 16.794228] type=1400 audit(1329956096.232:16): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1228 comm="apparmor_parser"
[ 16.803325] type=1400 audit(1329956096.240:17): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1230 comm="apparmor_parser"
[ 16.888537] init: apport pre-start process (1296) terminated with status 1
[ 16.895003] init: apport post-stop process (1319) terminated with status 1
[ 17.145891] Bluetooth: Core ver 2.16
[ 17.145907] NET: Registered protocol family 31
[ 17.145909] Bluetooth: HCI device and connection manager initialized
[ 17.145911] Bluetooth: HCI socket layer initialized
[ 17.145913] Bluetooth: L2CAP socket layer initialized
[ 17.145952] Bluetooth: SCO socket layer initialized
[ 17.147440] Bluetooth: RFCOMM TTY layer initialized
[ 17.147443] Bluetooth: RFCOMM socket layer initialized
[ 17.147445] Bluetooth: RFCOMM ver 1.11
[ 17.268502] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.268505] Bluetooth: BNEP filters: protocol multicast
[ 17.278350] fglrx_pci 0000:01:00.0: irq 45 for MSI/MSI-X
[ 17.278933] [fglrx] Firegl kernel thread PID: 1483
[ 17.278982] [fglrx] Firegl kernel thread PID: 1484
[ 17.279029] [fglrx] Firegl kernel thread PID: 1485
[ 17.279431] [fglrx] IRQ 45 Enabled
[ 18.219786] [fglrx] Gart USWC size:1280 M.
[ 18.219789] [fglrx] Gart cacheable size:508 M.
[ 18.219794] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 18.219796] [fglrx] Reserved FB block: Unshared offset:fbfd000, size:403000
[ 18.219799] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 18.688505] HDMI hot plug event: Pin=3 Presence_Detect=1 ELD_Valid=0
[ 18.688521] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[ 18.690136] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=1
[ 18.690149] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[ 19.273087] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro,commit=0
[ 19.284784] EXT4-fs (sde1): re-mounted. Opts: commit=0
[ 19.336713] EXT4-fs (dm-0): re-mounted. Opts: commit=0
[ 20.047546] init: plymouth-stop pre-start process (1570) terminated with status 1
[ 34.216853] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro,commit=0
[ 34.413172] EXT4-fs (sde1): re-mounted. Opts: commit=0
[ 34.511862] EXT4-fs (dm-0): re-mounted. Opts: commit=0
[ 2868.669568] vboxdrv: Found 8 processor cores.
[ 2868.670302] vboxdrv: fAsync=0 offMin=0x48c offMax=0x7458
[ 2868.670414] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 2868.670419] vboxdrv: Successfully loaded version 4.1.2_Ubuntu (interface 0x00190000).
[ 2868.688499] vboxpci: IOMMU found
[ 8174.233391] HDMI hot plug event: Pin=3 Presence_Detect=1 ELD_Valid=1
[ 8174.233438] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[ 8174.250232] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 8174.250246] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 8565.158997] HDMI hot plug event: Pin=3 Presence_Detect=1 ELD_Valid=0
[ 8565.159019] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[ 8565.160611] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=1
[ 8565.160629] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[ 9012.984117] usb 3-2: new high speed USB device number 3 using ehci_hcd
[ 9013.494842] usbcore: registered new interface driver uas
[ 9013.496768] Initializing USB Mass Storage driver...
[ 9013.497129] scsi6 : usb-storage 3-2:1.0
[ 9013.497335] usbcore: registered new interface driver usb-storage
[ 9013.497340] USB Mass Storage support registered.
[ 9014.497173] scsi 6:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4
[ 9014.600879] sd 6:0:0:0: Attached scsi generic sg5 type 0
[ 9014.601325] sd 6:0:0:0: [sdf] 3907024896 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 9014.602197] sd 6:0:0:0: [sdf] Test WP failed, assume Write Enabled
[ 9014.603078] sd 6:0:0:0: [sdf] Asking for cache data failed
[ 9014.603085] sd 6:0:0:0: [sdf] Assuming drive cache: write through
[ 9014.607731] sd 6:0:0:0: [sdf] Test WP failed, assume Write Enabled
[ 9014.608714] sd 6:0:0:0: [sdf] Asking for cache data failed
[ 9014.608722] sd 6:0:0:0: [sdf] Assuming drive cache: write through
[ 9014.623743] sdf: sdf1
[ 9014.626560] sd 6:0:0:0: [sdf] Test WP failed, assume Write Enabled
[ 9014.627443] sd 6:0:0:0: [sdf] Asking for cache data failed
[ 9014.627450] sd 6:0:0:0: [sdf] Assuming drive cache: write through
[ 9014.627457] sd 6:0:0:0: [sdf] Attached SCSI disk
[ 9116.206488] usb 3-2: USB disconnect, device number 3
[ 9214.300048] usb 3-2: new high speed USB device number 4 using ehci_hcd
[ 9214.434382] scsi7 : usb-storage 3-2:1.0
[ 9215.432879] scsi 7:0:0:0: Direct-Access Seagate FA GoFlex Desk 0155 PQ: 0 ANSI: 4
[ 9215.561470] sd 7:0:0:0: Attached scsi generic sg5 type 0
[ 9215.579761] sd 7:0:0:0: [sdf] 3907029167 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 9215.580262] sd 7:0:0:0: [sdf] Write Protect is off
[ 9215.580270] sd 7:0:0:0: [sdf] Mode Sense: 1c 00 00 00
[ 9215.580770] sd 7:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9215.590036] sdf: sdf1
[ 9215.592755] sd 7:0:0:0: [sdf] Attached SCSI disk
[ 9276.629797] usb 3-2: USB disconnect, device number 4
[ 9276.648288] sd 7:0:0:0: [sdf] Synchronizing SCSI cache
[ 9276.648392] sd 7:0:0:0: [sdf] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 9305.528120] usb 8-1: new high speed USB device number 2 using xhci_hcd
[ 9305.545862] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 9305.546241] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 9305.546613] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 9305.546919] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 9305.547892] scsi8 : usb-storage 8-1:1.0
[ 9306.548855] scsi 8:0:0:0: Direct-Access Seagate FA GoFlex Desk 0155 PQ: 0 ANSI: 4
[ 9306.740566] sd 8:0:0:0: Attached scsi generic sg5 type 0
[ 9306.762543] sd 8:0:0:0: [sdf] 3907029167 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 9306.762977] sd 8:0:0:0: [sdf] Write Protect is off
[ 9306.762984] sd 8:0:0:0: [sdf] Mode Sense: 1c 00 00 00
[ 9306.763413] sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9306.772811] sdf: sdf1
[ 9306.774256] sd 8:0:0:0: [sdf] Attached SCSI disk
[11464.918505] HDMI hot plug event: Pin=3 Presence_Detect=1 ELD_Valid=1
[11464.918533] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[11464.922567] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=0
[11464.922586] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[11557.275127] HDMI hot plug event: Pin=3 Presence_Detect=1 ELD_Valid=0
[11557.275149] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[11557.276686] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=1
[11557.276704] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[15663.888285] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint